🔍It’s that time of the week again! 🕵🏻During an on-site inspection last week, Guardian electrical inspectors, Sam Childes & Steve Coward came across this socket which was found to be without a neutral wire. 📜Upon the discovery of this, the cable was traced back to the distribution board, later revealing that the connector block had…
🌟 Exciting News! 🌟 Guardian Electrical Compliance is thrilled to announce that we will be attending the Independent Hotel Show at the ExCel Exhibition Centre in London on October 15th & 16th, 2024! Join us to explore the latest in electrical compliance solutions tailored for the hospitality industry. Whether you’re looking to enhance safety, efficiency,…
⚠️Another Friday, another dangerously exposed distribution board… 🤔Where to start on this one… this specific DB pictured below was recently discovered by one of our electrical inspectors whilst conducting a site survey. 🦺As can be seen, not only is this board missing a door, but it is also allowing easy access to live bus bars,…
👷🏻During a recent on-site visit, Guardian’s electrical inspector Andy Dunn shockingly came across this very easily accessible live bus bars…. without a tool! Thankfully, no injuries occurred because of this! ⚠️Thanks to the work of our inspectors like Andy, deadly unidentified hazards within workplaces can be found, alerted, and rectified. Many workplaces like this example…
If you work with electricity, you need to know about the Electricity at Work Regulations 1989 (EaWR1989) and the IET Wiring Regulations (BS7671). These are two sets of regulations that aim to ensure the safety of electrical installations and equipment in the workplace. Here are some basic facts about them to ensure you’re in the…
Fixed Wire Inspection, also known as Fixed Wire Testing, is a process that inspects and tests all electrical installations on-site to ensure they are safe and compliant with regulations. This includes checking main panels and distribution boards but does not include equipment that is plugged in. The inspection involves visual inspections and electrical tests on…
One of the key aspects of the Electricity at Work Regulations 1989 (EaWR) is the obligation to provide suitable means of cutting off and isolating electrical equipment in case of danger. This is an ABSOLUTE regulation, meaning that there is no excuse for not following it. The Health and Safety Executive (HSE) will not tolerate…
As an electrical contractor, Guardian knows how important it is to have a safe system of work. A safe system of work is not just a document, but a practical and effective way of working that reduces the risk of accidents and injuries. It should reflect the reality of what is done on-site and comply…
The HSE stands for the Health and Safety Executive, and they are the independent authority for health and safety at work in Great Britain. They have the power to inspect, investigate and enforce the law to prevent work-related harm. Above all else, they are dedicated to protecting people and places, and helping everyone lead safer…
🧐Another Friday… Another Find! Whilst conducting a recent on-site visit, one of Guardians’ inspectors discovered this simple but potentially fatal error within this external socket. Upon removal of the cover, it was found that the live & neutral wire had been reversed… 👍Thanks to the thorough work by our inspectors, this was swiftly and safely…
For quite some time, there has been an unknown between BS7671 and other British safety standards. Duty holders can be placed at risk of non-compliance with EaWR 1989 due to panels being installed, modified, and replaced without any relevant documentation.This is where a Panel Risk Assessment come in! Panel Risk Assessments are also:✔️A way of…
😱⚡Prior to ourselves being on-site, this specific client recently had some work carried out via another contractor. However, as a result of this, issues began to occur and resultantly got in touch with us to attend site and investigate why they were suffering power loss following Solar PV install – what we found was shocking!…
🔌 Electrical Equipment Testing (EET) is more than just a legal requirement – it’s a way to protect your business and your employees from electrical hazards. 🔌 EET, formerly known as PAT (Portable Appliance Testing), is the practice of checking and testing electrical appliances and equipment to make sure they are safe and comply with…
Another Friday… another Find! This time brought to you by Guardian’s very own Sam Bray. As you can see below, the worrying lack of ingress protection on this distribution is far from acceptable… especially due to the environment it is situated in …… a papermill. Scenarios like this place an unnecessarily dangerous hazard to the…
🚘From the North of Scotland to the South of England, we’ve got you covered! 🏢Our nationwide team travel far and wide around the UK working for businesses within many industries! 👨💻Check out our website today and take a look at the various services we offer! 🗣️Get in contact with us today! 📲0114 257 2080 📩[email protected]…
Are you a dutyholder who needs to ensure electrical compliance and safety on your site? If so, you might want to check out Guardian Electricals’ Famous Dutyholder Guide. It’s a free and easy-to-read guide that covers the essential legislation and regulations that affect your role, such as Electricity at Work Regulations 1989 and 18th Edition…
📅During the month of April, not only did Guardian take part in the Theo Cup for The Children’s Hospital Charity, but we are also proud to announce that two of our lovely colleagues Mick & Hayley also solely took part in the Team Theo’s Abseil Event on Sunday 21st April! 🏢However, this event was not…
On Sunday 28th April Guardian FC were back in competitive football action as we competed in the Theo Cup in support of The Childrens Hospital Charity! Having drawn 2-2 in normal time, this year was not meant to be for the lads who went out on penalties in the knockout stages. Despite the whirlwind playing…
Get in contact with us today and discover how Guardian can help make your Electrical Vehicle Supply Equipment goals a reality! #EVSE#ElectricalVehicleSupplyEquipment#Compliance#FeasibilityStudy
🤔What’s a thermographic survey you may ask? A thermographic survey is undertaken using thermal imaging cameras which detect heat. They allow our inspectors to find any weaknesses (also known as ‘Hotspots’) within electrical components. It also provides an in-depth look at testing and helps to detect any risks that have been missed from a visual…
During a recent site visit Guardian’s, Chris Barrett, came across this Busbar Tap off, that has had the installed fuses replaced. However, this is where the problem occurs. In the process of replacement, a normal piece of cable was installed as opposed to the required fuse/protective device. In essence, the outgoing cable had no circuit…
During the game between Rotherham United & Birmingham City on Saturday 20th April, Guardian Electrical were once again proud to pass the torch over to a great hospice, in the Rotherham Hospice to sponsor the trainingwear for a one-off game which was worn by the first team players for all to see. With this in…
What is the Electricity at Work Regulations of 1989? 🤔💭 The Electricity at Work Regulations 1989 is a set of regulations created under the Health and Safety at Work etc. Act 1974. These regulations require precautions to be taken against the risk of death or personal injury from electricity in work activities. The regulations apply…
During one of our recent site visits, our Inspectors came across this incredibly rusty Distribution Board! At further inspection, it is evident that not only this DB, but also its surrounding area have all been taken victim of the rust. Why may you ask? Well, this specific site is located by the side of an…
Lets celebrate National Pet Day is a wonderful opportunity to celebrate the diverse and delightful companions that brighten our lives. From the loyal dogs that wag their tails with pure joy, to the playful cats that turn ordinary moments into adventures, and the chirpy budgies that fill our homes with song. Each pet holds a…
⚽With just over 5 weeks until the big day, Guardian FC are happy to announce that we will be competing in the Theo Cup Football Tournament on Sunday 28th April 2024 in support of our chosen charity, The Children’s Hospital Charity. The competition will be taking place at the Goodwins Sports Centre in Sheffield, and…
In the build up to last Friday’s Red Nose Day, we set ourselves a goal of raising as much money as possible for Comic Relief by creating our very own ‘guess the amount of red noses’ game as well as a mini cake sale too! 🎂 Our colleagues around the offices took it to themselves…
IWD is a global holiday celebrated as a focal point in the Women’s rights movement. Giving focus to issues such as gender, equality, reproductive rights and violence and abuse against women. #internationalwomensday #iwd #celebration #empoweringwomen
Fixed Wire Inspection, also known as Fixed Wire Testing, is a process that inspects and tests all electrical installations on-site to ensure they are safe and compliant with regulations. This includes checking main panels and distribution boards but does not include equipment that is plugged in. The inspection involves visual inspections and electrical tests on…
Whilst recently out on-site, one of our observatory inspectors came across thermal damage whilst conducting testing in a control panel for a large industrial 63 AMP Three Phase Oven. The Yellow/L2 phase supply conductor to this panel, was originally hidden behind a clear, Perspex protective casing, which was going into the supply side of the…
For quite some time, there has been an unknown between BS7671 and other British safety standards. Duty holders can be placed at risk of non-compliance with EaWR 1989 due to panels being installed, modified, and replaced without any relevant documentation.This is where Panel Risk Assessments come in! Panel Risk Assessments are also:✔️A way of ensuring…
As an electrical contractor, Guardian knows how important it is to have a safe system of work. A safe system of work is not just a document, but a practical and effective way of working that reduces the risk of accidents and injuries. On-site work should reflect the reality of and comply with the Electricity…
The HSE stands for the Health and Safety Executive, and they are the independent authority for health and safety at work in Great Britain. They have the power to inspect, investigate and enforce the law to prevent work-related harm. Above all else, they are dedicated to protecting people and places, and helping everyone lead safer…
What’s black, yellow, and hot…? This middle cable! But this is no joke… On a recent inspection by our team conducting testing in a control panel for a large industrial 63 AMP Three Phase Oven, this cable was found not terminated correctly into the terminal. This therefore over time, caused heat build-up and potential arcing…
🎓Technical Tuesday – Why you need to comply with Regulation 12 of EaWR. One of the key aspects of the Electricity at Work Regulations 1989 (EaWR) is the obligation to provide suitable means of cutting off and isolating electrical equipment in case of danger. This is an ABSOLUTE regulation, meaning that there is no excuse…
Exposed AND outside, I know I wouldn’t fancy it this winter, and neither would this plug socket🥶 During a recent inspection and testing programme one of our inspectors discovered this damaged electrical fitting for an outdoor plug socket, with exposed wiring. 🔌 This hazard shows the importance of regular inspection and testing on-site, as this…
Electrical Equipment Testing (EET) is more than just a legal requirement – it’s a way to protect your business and your employees from electrical hazards. EET, formerly known as PAT (Portable Appliance Testing), is the practice of checking and testing electrical appliances and equipment to make sure they are safe and comply with the relevant…
If you work with electricity, you need to know about the Electricity at Work Regulations 1989 (EaWR1989) and the IET Wiring Regulations (BS7671). These are two sets of regulations that aim to ensure the safety of electrical installations and equipment in the workplace. So, here are some basic facts about them to ensure you’re in…
Fridays Find – Find of the Year! 🤯 Where the film industry has the Oscars, and the music industry has the Grammys. We’re starting off this new year looking back on 2023 and awarding this spot ‘Find of the Year’! 🥳 One of our inspectors came across this live conductor found in metal socket outlet,…
Are you a dutyholder who needs to ensure electrical compliance and safety on your site? If so, you might want to check out Guardian Electrical’s’ educational Dutyholder Guide. It is a free and easy-to-read guide that covers the essential legislation and regulations that affect your role, such as Electricity at Work Regulations 1989 and…
👩🏻🔧 Technical Tuesday – Thermographic Surveys 👩🏻🔧 Guardian offers many services and one of them is the thermographic surveys, which uses a thermal imaging camera to detect heat in electrical components. Therefore, the camera helps our inspectors to identify any hotspots that indicate weaknesses or faults in the electrical system. Importantly, thermographic surveys can also…
Mission Christmas – cash for kids🎁 Today, the lovely Jen and Hayley took a trip to Hallam FM to where ‘Mission Christmas – cash for kids’ have been based for their present collection. Armed with bags of presents, they dropped off the selection of gifts from Guardian employees who have been donating for the past…
During a recent inspection our team came across a set of wire that had made a bid for freedom…🏃♂️ As you will be able to see in the photos, the wires were all over the place and even coming out of the protective trunking. It is not a pretty sight to see but, above all…
The best part of Christmas is seeing everywhere decked with Christmas lights, decorations, and all-round sparkle. ✨✨✨ Guardian Electrical are adding to that sparkle, for or another year we are taking part in Children’s Hospital Charity Snowflake Campaign by sponsoring a snowflake that can be spotted on the hospital building, see photo! 🌟🌟🌟 The campaign…
We are beyond excited to announce we are a proud sponsor of the upcoming Jon, Lucy & Friends Annual Comedy Night.🎉 Come join us at the Sheffield City Hall on Wednesday 15th May , there is no doubt we are all in for a huge treat for this comedy night! 😁 Our partnership with this…
Guardian Electrical is a trusted provider of Remedial services for our clients since February 2019. We help our clients to address any electrical issues that are found during an Electrical Inspection and Testing on-site. An Electrical Danger Notification (EDN) is issued for any of the following observations: 🟥Code 1 – Immediate danger 🟧Code 2 –…
🔧👀Fridays Find– Precarious Plumbing 👀🔧 Here’s what a member of our team came across while out on a site in Scotland. As can be seen in the image below, recent plumbing work had opted for the easy route and installed their pipework alongside some single insulated cabling. 💧 In the possible scenario of a burst…
Electrical Inspection & Testing is a vital part of ensuring safety and compliance in your workplace. 👷♂️ As a dutyholder, you have a legal obligation to provide a safe working environment for your employees and visitors, as well as to maintain your electrical systems in accordance with the Health and Safety at Work Act and…
Our inspectors recently found two DB enclosures that looked worn out and needed replacement. 🎓BS7671 regulation 512.2.1 states “Equipment shall be of a design appropriate to the situation in which it is to be used or its mode of installation shall take account of the conditions likely to be encountered.” Why are rusty boards a…
👨🏻🔧 Technical Tuesday – Panel Risk Assessments and The Compliance Gap👨🏻🔧 Guardian offers Panel Risk Assessments since 2021 to help you avoid hazards, near misses or accidents on-site when working on an electrical panel. A Panel Risk Assessment evaluates the risks of working within electrical control panels and other enclosures while they are energized for fault…
Quick Response Code – QR code for short, is a technology that revolutionized the automotive industry, invented by Masahiro Hara in 1994. QR codes are black and white patterns that can store web addresses and other data. They can be scanned by smartphones and other devices. QR codes are not mandatory by law, but they…
The following picture shows the build-up of dust on a distribution board, which one of our electrical inspectors from Guardian discovered on site. This kind of situation can lead to dangerous electrical hazards as well as Health and Safety in the workplace, as it could lead to a fire hazard which could endanger staff members…
Guardian Electrical are the UK’s leading electrical safety service provider.We offer customised Fixed Wire Inspection & Testing programmes for thousands of companies across the United Kingdom. We have a big and committed team of nearly 200 inspectors and over 100 office staff, located in Sheffield, Milton Keynes, and Glasgow. We cover the whole of the…
Whilst out on-site, one of Guardians very own electrical inspectors, Jamie Dodds, discovered this very problematic panel that had resultantly ignited a fire from within. This was due to a previous panel being fitted incorrectly. On a positive note, thankfully nobody was injured because of this, however, on a different day the circumstances may have…
During one of Guardians recent on-site inspections, this dangerous and deadly exposed live conductor as shown below, was detected thanks to the thorough work of our excellent electrical inspectors. Thankfully, neither our inspector nor member of staff located on site were hurt in this situation, despite the high level of risk facing them. One of…
📍Come and pop over to our Stand N3, at Sandown Park, Surrey between 🕛10 – 4pm. Our representatives, Matt Gilmore and Nigel Hayes, are here to engage with you and share insights about working for Guardian Electrical and the exciting role of an Electrical Inspector. When you visit Stand N3, here’s what you can…
We’re thrilled to announce that Guardian Electrical will be exhibiting at the Elex Show in Sandown, Surrey on November 2nd and 3rd, 2023. 📅 Don’t forget to bring your C.V! 🛠️ See you there! 🎉 #ElexShow#RecruitmentDrive#GuardianElectrical#ElectricalInspectors#JoinOurTeam#Elex2023
Fixed Wire Inspection and Testing is a vital procedure to ensure the safety and compliance of your electrical installations. It involves checking and testing all the wiring and equipment that are permanently connected to the mains supply, such as panels and boards. The inspection includes both visual and electrical tests on all the systems in…
We’re on a nationwide hunt for Electrical Inspectors who share our passion for excellence. 👉 Come visit our stand and let’s chat about exciting career opportunities! Your future in electrical inspection starts here. 🧠Don’t forget to bring your C.V! 🛠️ See you there! 🎉 #ElexShow#RecruitmentDrive#GuardianElectrical#ElectricalInspectors#JoinOurTeam#Elex2023
We’re on a nationwide hunt for Electrical Inspectors who share our passion for excellence. 👉 Come visit our stand and let’s chat about exciting career opportunities! Your future in electrical inspection starts here. 🧠Don’t forget to bring your C.V! 🛠️ See you there! 🎉 #ElexShow #RecruitmentDrive #GuardianElectrical #ElectricalInspectors #JoinOurTeam #Elex2023
Drop by our stand number 2355 and chat with our experts about all your electrical compliance needs. ⚡ ✨ Join us to watch our TraQ-it demonstration and learn how we can help your hotel stay safe and compliant. Our team is here to assist you. Save the date: 🗓️ Date: 16-17 October 2023 📍 Stand:…
On a routine site walkaround, the team was geared up for their usual tasks. Little did they know, they were about to witness something that would plunge them into blackness! With a casual tug, the electrician opened a seemingly ordinary electrical riser cupboard door. Suddenly, an earth-shattering BANG💥echoed through the hallway, plunging the entire floor…
We decided to trade in our keyboards for horses and dress up posh for a day of pure racing exhilaration at Doncaster Racecourse! 🐴 Our day started with a furious debate about the best racing strategy, which boiled down to, “Bet on the horse with the coolest name!” 🐎🤑 And then the races began! We…
Many duty holders are unaware of the gap between BS7671 and other British safety standards when it comes to electrical panels. Panels that are installed, modified, or replaced without proper documentation can expose duty holders to legal and safety risks under EaWR 1989.That’s why Panel Risk Assessments are essential! Panel Risk Assessments are also:🤝A way…
TraQ-it is a web-based platform that allows you to access, manage and update your electrical inspection and testing reports anytime, anywhere. Whether you use your phone, tablet or computer, you can log in to TraQ-it and view your EIC Reports, Network Drawings, EDNs and more. You can also send us any corrective actions or changes…
While recently out on – site, one of our very own engineers discovered this deadly hazard of a damaged cable located within one of the distribution boards. As seen in the image below, this specific cable looks to have been tampered with in a temporary attempt to hinder the risks involved within a situation such…
While on-site one of Guardian’s engineers discovered this cable terminated to the main incoming supply which was cut off and left live. Live wires are dangerous and can cause electric shocks or fires if not handled properly. If a human were to come in contact with this live wire, they should be protected by the…
The Health and Safety Executive (HSE) is the national independent regulator for health and safety in the workplace throughout Great Britain. They inspect, investigate and take enforcement action when necessary to prevent work-related injuries and illness. So, what are the HSE looking for in your business? 🔍 Obvious faults – such as exposed or dangerous…
Exclusive images from the undercroft beneath this swimming pool reveal a startling reality! Previous attempts to repair and protect corroded containment systems have left us all in amazement. What lies beneath has come to light, and we’re diving in to make it right. This isn’t just about aesthetics; it’s about adhering to vital electrical regulations.…
As can be seen below, this was the condition of one of the distribution boards, found on site by one of Guardian’s electrical inspectors. This specific board was left open to a huge amount of dust and resultantly looks like this due to the time of exposure. This therefore creates a huge hazard that could…
EET, formerly known as PAT (Portable Appliance Testing), is the process of inspecting and testing electrical appliances and equipment to ensure they are safe and compliant with the relevant standards. Guardian Electrical offers EET as part of our Complete Managed Compliance Services. As the duty holder, you have a legal obligation to ensure that the…
MND (Motor Neurone Disease) is a condition that affects the nerves in the brain and spinal cord, causing them to gradually stop working. This leads to muscle weakness, difficulty speaking, swallowing and breathing. Some people face challenges with courage and determination and inspire others to do the same. One of them is Guardian engineer Callum…
➡️Please help us celebrate Matt’s success in getting a 🥇FIRST in BEng(Hons) Engineering Management. Well done! 👏👏👏👏At Guardian, we believe in the potential of our people. We want you to grow, learn and excel in your career. That’s why we provide you with the tools, resources and support you need to achieve great things.✨
A QR code (quick-response code) is a type of two-dimensional matrix barcode that can be read by an imaging device such as a camera, and processed using Reed–Solomon error correction until the image can be appropriately interpreted. Despite not being legally required by the EaWR 1989, QR codes are proving extremely popular in the industry…
During a recent inspection and testing programme one of our inspectors discovered this damaged twin plug socket, with exposed phase and earth internal bus connections, located in a school classroom. This hazard shows the importance of regular inspection and testing on-site, as this damaged plug socket was never reported to the on-site maintenance team. The…
Guardian Electrical are the leading electrical safety service provider in the UK, founded in October 2010. We specialise in customised Fixed Wire Inspection & Testing programmes for a wide range of companies across the country. We have established long-term partnerships with more than 3,000 clients, such as BAE Systems, Nestle, Next, Manchester United Football Club,…
Guardian Electrical has partnered with the Sheffield Children’s Hospital Charity for many years now, with regular monthly donations and other special fundraising events, including bake sales, football events and other sponsorships. 💵 During 2022, Guardian’s monthly donations to the charity alone exceeded over £3,600 💵 We are incredibly proud to partner with such a special…
📖 REGULATION 12 – Requirement for documented Inspection Schematic Drawings and Labelling System 📍Regulation 12 of the IET BS7671 requires that suitable means for cutting off the supply and for isolation are available where necessary to prevent danger. This includes methods of identifying circuits. The regulation further requires that isolation is carried out in such a…
Fixed Wire Inspection, also known as Fixed Wire Testing, is a process that inspects and tests all electrical installations on-site to ensure they are safe and compliant with regulations. This includes checking main panels and distribution boards but does not include equipment that is plugged in. The inspection involves visual inspections and electrical tests on…
What is the Electricity at Work Regulations of 1989? The Electricity at Work Regulations 1989 is a set of regulations created under the Health and Safety at Work etc. Act 1974. These regulations require precautions to be taken against the risk of death or personal injury from electricity in work activities. The regulations apply to…
To the untrained eye, this new installation appears satisfactory but what you may not notice is where the earth is terminated, on the neutral bar. ⚠️ Terminating an earth cable to a neutral bar is not recommended. If the neutral and grounding wires are connected together anywhere else, the return current that is meant to…
While recently attending site, one of our engineers came across this burnt switch panel creating a significant hazard and risk of further damage. An electrical switch panel is a piece of equipment that distributes electric power from one or more sources of supply to several smaller load circuits. It is an assembly of one or…
👉 What is it? 🚨Emergency light testing is an assessment on a building’s emergency lighting system, to check they work properly and comply with local and national safety standards. This testing happens on a regular basis to ensure the lighting system functions as intended—that is, to provide illumination during power outages and emergencies. 👉 What is…
Busbars are metal conductors that carry high-voltage electricity, if they are not covered by the appropriate enclosures, they pose a serious danger to anyone who comes into contact with them, either directly or indirectly, as they can cause electric shock, burns, fire or explosion. ⚠️ Some of the dangers of exposed live busbars are ➡️…
Electrical compliance can be complicated but the experienced Directors at Guardian have created a free and simple guide to help you achieve complete compliance and electrical safety on-site. Incorporating crucial legislation, including the Electricity at Work Regulations 1989 and 18th Edition BS 7671: 2018+A2:2022 this booklet ensures that you are kept up to date with…
Whilst undertaking fixed wire inspection & testing at a large manufacturing site, our Guardian Engineers revealed chaotic scenes in the roof space. Issues included ➡️ ⚠️ Contactors with no covers ⚠️⚠️ Various light points unscrewed, leaving terminals exposed ⚠️⚠️Cables running over floor space. Enclosures/covers missing ⚠️⚠️Distribution boards installed in unsafe areas, restricting access ⚠️⚠️Live conductors…
In our continuous effort to enhance user experience and provide you with the best possible service, we are transitioning from our current mobile app available on the Apple App Store and Google Play Store to a modern and feature-rich web-app platform. At Guardian Electrical Compliance, we understand the importance of convenience, accessibility, and seamless…
Guardian’s own FD, Richard Roebuck, presented the winning award to Rotherham United’s goalkeeper Viktor Johansson. 🤝 👏👏 A big well done to all nominated! 👏👏 https://www.themillers.co.uk/news/2023/may/awards–johansson-claims-players-player-of-the-season-award/
During a recent inspection and testing programme, one of our inspectors probably wanted to cry at the state of this scene! When showing this image to the office, so many regulations came up in quick succession, the list was endless! So many in Part 5 “Selection & Erection of Equipment” again and also 134.1.1 makes…
Selected from over 40 other applicants, TraQ-it has been crowned the winner of the 2022 Tomorrow’s FM Awards. Receiving such recognition for many years of hard work means a great deal to all members of Guardian Electrical Compliance. Managing Director, Ian Carnall has penned a few words of appreciation – “Our unique online, real-time, interactive…
Falling within the umbrella of our complete managed compliance service, thermographic surveys are included as a supplement to all our fixed wire testing programs – a service not usually not included by our competitors. With the assistance of a thermal imaging camera, our engineers are able to capture potential weaknesses within electrical components, also known as “hot spots” which,…
Approximately two years ago, Guardian Electrical Compliance Ltd was awarded a five-year contract to provide fixed wire testing and inspection for 770 Tesco One Stop outlets. This was followed later in 2019 with the winning of the fixed wire tender for the full Tesco Estate: circa 2,700 and 500 petrol filling stations; the latter to…
Christmas is upon us and once again, Guardian have decided to partake in a few of charitable events; two of which are fast becoming a ‘Guardian tradition’. Giving back to local charities is extremely important to us and as the company grows, our ability to give back to the local community should be reflected. Throughout…
Following our annual tradition at Guardian Electrical Compliance, staff have brought in gifts to donate to Cash for Kids Mission Christmas. Mission Christmas was set up by the charity, Cash for Kids. This involves buying an extra Christmas present that will be donated to a disadvantaged child in the local area, meaning they will have a gift…
Electrical Safety Seminar Scotland Thursday 21st March 2019 – Crossbasket Castle, Glasgow This will be Guardian’s 71st Electrical Safety Seminar of this type, the first being in February 2000 during the days of the 16th Edition. Throughout this period, we have presented to almost 6,000 Dutyholders from 4,000 companies and organisations. We have delivered four…